RouterFix  ›  ModelsIndependent support guide

Quantum Fiber C6500XK SmartNID: Specs, Setup and Support

Quantum Fiber C6500XK SmartNID is a fiber-ont-gateway in the checked US research. Confirm the fiber-ont-gateway role in the official manual before using this device as a gateway, access point or mesh node. The fields below reflect only the cited scope; confirm the printed hardware revision before following a menu path.

Advertisement

Before you change anything

This is a research reference, not evidence of a hands-on test. Features that depend on region, firmware or hardware revision remain conditional.

At a glance

Verified model fields
Device rolefiber-ont-gateway
Wi-Fi generationNot verified for this exact unit
Bands (GHz)Not verified for this exact unit
Wi-Fi radioNo built-in radio
Documented modesNot verified for this exact unit
DOCSIS versionNot verified for this exact unit
Coax standardNot verified for this exact unit
Setup appNot verified for this exact unit
Mesh ecosystemNot verified for this exact unit
Hardware revisionNot verified for this exact unit
US SKUNot verified for this exact unit

Marketing Wi-Fi link rates are theoretical and are not a measured internet speed.

Ports and power

Documented Ethernet ports
RoleCountLink speedNote
WAN/LAN110000 MbpsData sheet lists 10/100/1000/10000; 2.5G/5G negotiation not established.
LAN11000 Mbps—

Documented power: 1.5 A adapter rating. Check the exact unit label and total switch budget.

Advertisement

Feature evidence

Capability evidence and conditions
FeatureResearch statusCondition
Native WifiDocumented unavailable in the stated scopeunsupported for stated hardware
Dual WanNot verifiedunknown
MloNot verifiedunknown
Poe InputNot verifiedunknown
Poe OutputNot verifiedunknown
Vlan 8021QNot verifiedunknown
Vpn Client OpenvpnNot verifiedunknown
Vpn Client WireguardNot verifiedunknown

Source conflict

A data-sheet subheading uses C6500XG while the model title and ISP page use C6500XK.

Source conflict

Data-sheet rate list includes 10/100/1000/10000 but does not establish 2.5G/5G negotiation.

Before changing settings

  1. Read the model and hardware revision from the device label.
  2. Record the current firmware and connection mode.
  3. Save a safe copy of current settings or wiring where supported.
  4. Open the official support page for this precise US revision.

LED and firmware references

Documented indicator states
IndicatorStateMeaning
front statusred / solidHardware self-test.
front statusred / blinkingHardware test failure or service failure.
front statusblue / blinkingSynchronizing with the provider network.
front statusblue / solidSynchronization completed; SmartNID ready.
front statusamber / solidAccount action is required.
front statusgreen / solidInternet connection available.
front statuswhite / solidTransparent bridge mode is active.
front status / offNo power or disconnected power.

Locate the official support entry from the source list before downloading firmware. RouterFix does not host firmware files.

Advertisement

Official sources

Check your exact US model, hardware revision, and firmware on the linked support page before changing settings.

Keep going

Advertisement