RouterFix  ›  ProblemsIndependent support guide

How to Troubleshoot DHCP and IP Conflicts

IP conflicts and DHCP instability can occur when two routers serve the same LAN range or duplicate addresses are assigned.

Advertisement

Before you change anything

This is a diagnostic entry point. The source supports the general check, not a confirmed root cause for your device.

What to check first

Which observed symptom, exact model and firmware changed before the failure?

Record the exact model, hardware revision, firmware and recent change before adjusting settings. If you cannot answer the question, keep the cause open.

Narrow the likely path

Diagnostic branches
ObservationNext check
Gaming NAT warningClassify upstream routing and CGNAT before opening ports.
Firmware or restart issueCheck the precise revision, power and vendor recovery instructions.
Security or DHCP issueRecord current settings, local address ranges and device identity before altering access.
Advertisement

Decision after the first test

Record each gateway's LAN subnet and DHCP role, then change only the conflicting range after preserving access to both admin pages.

Use a documented next step

Verify before escalating

After each change, repeat the exact failed task. If the result is unchanged, restore the previous setting and use the official support link for your exact hardware revision. Don’t assume a menu or capability from a related model.

Advertisement

Official sources

Check your exact US model, hardware revision, and firmware on the linked support page before changing settings.

Keep going

Advertisement