Wi-Fi 7, 6E and 6 describe radio capabilities, not a guaranteed internet speed. Client band support, channel width and Ethernet links can set lower practical limits.
Before you change anything
This is a diagnostic entry point. The source supports the general check, not a confirmed root cause for your device.
What to check first
How do wired and Wi-Fi tests compare at the same time and test location?
Record the exact model, hardware revision, firmware and recent change before adjusting settings. If you cannot answer the question, keep the cause open.
Narrow the likely path
| Observation | Next check |
|---|---|
| Wired path is also slow | Check WAN service, link negotiation and upstream equipment. |
| Only Wi-Fi is slow | Compare near-router radio performance with the problem room and mesh backhaul. |
| Latency rises under load | Measure upload/download load separately before changing QoS or SQM. |
Decision after the first test
Check the client standard and band, the router ports and a measured wired baseline before treating a PHY rate as throughput.
Use a documented next step
Verify before escalating
After each change, repeat the exact failed task. If the result is unchanged, restore the previous setting and use the official support link for your exact hardware revision. Don’t assume a menu or capability from a related model.
Official sources
- Google Wifi and Nest Wifi official technical specifications (full_text; checked 2026-11-01)
- eero official model comparison (full_text; checked 2026-11-01)
- TP-Link US Wi-Fi bands, SSID, security and channel settings (full_text; checked 2026-11-01)
Check your exact US model, hardware revision, and firmware on the linked support page before changing settings.